ATmega328PU
৳ 420.00 ৳ 400.00
Quick Overview
The Atmel ATmega328P is a 32K 8-bit microcontroller based on the AVR architecture. Many instructions are executed in a single clock cycle providing a throughput of almost 20 MIPS at 20MHz. The ATMEGA328-PU comes in an PDIP 28 pin package and is suitable for use on our 28 pin AVR Development Board.
Features include:
High Performance, Low Power Design
8-Bit Microcontroller Atmel® AVR® advanced RISC architecture
131 Instructions most of which are executed in a single clock cycle
Up to 20 MIPS throughput at 20 MHz
32 x 8 working registers
2 cycle multiplier
Memory Includes
32KB of of programmable FLASH
1KB of EEPROM
2KB SRAM
10,000 Write and Erase Cycles for Flash and 100,000 for EEPROM
Data retention for 20 years at 85°C and 100 years at 25°C
Optional boot loader with lock bits
In System Programming (ISP) by via boot loader
True Read-While-Write operation
Programming lock available for software security
Features Include
2 x 8-bit Timers/Counters each with independent prescaler and compare modes
A single 16-bit Timer/Counter with an idependent prescaler, compare and capture modes
Real time counter with independent oscillator
10 bit, 6 channel analog to digital Converter
6 pulse width modulation channels
Internal temperature sensor
Serial USART (Programmable)
Master/Slave SPI Serial Interface – (Philips I2C compatible)
Programmable watchdog timer with independent internal oscillator
Internal analog comparator
Interrupt and wake up on pin change
Additional Features Features
Internal calibrated oscillator
Power on reset and programmable brown out detection
External and internal interrupts
6 sleep modes including idle, ADC noise reduction, power save, power down, standby, and extended standby
I/O and Package
23 programmable I/O lines
28 pin PDIP package
Operating voltage:
1.8 – 5.5V
Operating temperature range:
-40°C to 85°C
Speed Grades:
0-4 MHz at 1.8-5.5V
0-10 MHz at 2.7-5.5V
0-20 MHz at 4.5-5.5V
Low power consumption mode at 1.8V, 1 MHz and 25°C:
Active Mode: 0.3 mA
Power-down Mode: 0.1 μA
Power-save Mode: 0.8 μA (Including 32 kHz RTC)
Flash: 32 KBytes
EEPROM: 1 KBytes
SRAM: 2 KBytes
Max I/O Pins: 23
Frequency Max: 20 MHz
VCC: 1.8-5.5
10-bit A/D Channels: 6
Analog Comparator: Yes
16-bit Timers: 1
8-bit Timer: 2
Brown Out Detector: Yes
Ext Interrupts: 2
Hardware Multiplier: Yes
Interrupts: 26
ISP: Yes
On Chip Oscillator: Yes
PWM Channels: 6
RTC: Yes
Self Program Memory: Yes
SPI: 1
TWI: Yes
UART: 1
Watchdog: Yes
Package: Lead Free PDIP 28
We know you will love
1 in stock
Description
The Atmel ATmega328P is a 32K 8-bit microcontroller based on the AVR architecture. Many instructions are executed in a single clock cycle providing a throughput of almost 20 MIPS at 20MHz. The ATMEGA328-PU comes in an PDIP 28 pin package and is suitable for use on our 28 pin AVR Development Board.
Features include:
High Performance, Low Power Design
8-Bit Microcontroller Atmel® AVR® advanced RISC architecture
131 Instructions most of which are executed in a single clock cycle
Up to 20 MIPS throughput at 20 MHz
32 x 8 working registers
2 cycle multiplier
Memory Includes
32KB of of programmable FLASH
1KB of EEPROM
2KB SRAM
10,000 Write and Erase Cycles for Flash and 100,000 for EEPROM
Data retention for 20 years at 85°C and 100 years at 25°C
Optional boot loader with lock bits
In System Programming (ISP) by via boot loader
True Read-While-Write operation
Programming lock available for software security
Features Include
2 x 8-bit Timers/Counters each with independent prescaler and compare modes
A single 16-bit Timer/Counter with an idependent prescaler, compare and capture modes
Real time counter with independent oscillator
10 bit, 6 channel analog to digital Converter
6 pulse width modulation channels
Internal temperature sensor
Serial USART (Programmable)
Master/Slave SPI Serial Interface – (Philips I2C compatible)
Programmable watchdog timer with independent internal oscillator
Internal analog comparator
Interrupt and wake up on pin change
Additional Features Features
Internal calibrated oscillator
Power on reset and programmable brown out detection
External and internal interrupts
6 sleep modes including idle, ADC noise reduction, power save, power down, standby, and extended standby
I/O and Package
23 programmable I/O lines
28 pin PDIP package
Operating voltage:
1.8 – 5.5V
Operating temperature range:
-40°C to 85°C
Speed Grades:
0-4 MHz at 1.8-5.5V
0-10 MHz at 2.7-5.5V
0-20 MHz at 4.5-5.5V
Low power consumption mode at 1.8V, 1 MHz and 25°C:
Active Mode: 0.3 mA
Power-down Mode: 0.1 μA
Power-save Mode: 0.8 μA (Including 32 kHz RTC)
Flash: 32 KBytes
EEPROM: 1 KBytes
SRAM: 2 KBytes
Max I/O Pins: 23
Frequency Max: 20 MHz
VCC: 1.8-5.5
10-bit A/D Channels: 6
Analog Comparator: Yes
16-bit Timers: 1
8-bit Timer: 2
Brown Out Detector: Yes
Ext Interrupts: 2
Hardware Multiplier: Yes
Interrupts: 26
ISP: Yes
On Chip Oscillator: Yes
PWM Channels: 6
RTC: Yes
Self Program Memory: Yes
SPI: 1
TWI: Yes
UART: 1
Watchdog: Yes
Package: Lead Free PDIP 28
We know you will loVE
Only logged in customers who have purchased this product may leave a review.
Do you have a question?
Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!
[your_form_shortcode_here]
Reviews
There are no reviews yet.